Locoloc® #3-K Hydraulic Swager Kit

Exerts 14 tons pressure. A few strokes of handle brings the dies from wide open to contact with the fitting to be swaged. Then an internal valve automatically shifts from the low-pressure pump stage to the high-pressure compression stage. A relief valve prevents over-compression. 

The advanced-retract control for the ram is located in the movable handle. It is operated by twisting the handle less than a 1/4 turn. 

Full visibility of the working area is afforded by the narrow, 180-degree swivel “C” head, making it easy to position the dies on the fitting. Gauge supplied with each die. 

MADE IN THE USA: YES 

Our Locoloc® Swaging tools are domestically manufactured at our Naples, Florida facility. By purchasing swaging tools from Loos & Co., Inc., you are guaranteed a well-crafted American made product, while directly supporting American jobs and the American manufacturing industry 

Specifications 

Very rugged, yet portable, this hydraulic hand swaging press with interchangeable dies is for compressing aluminum or copper oval sleeves on 1/4″, 9/32″, 5/16″, 3/8″, 7/16″ and 1/2″ diameter cable and wire rope, plus aluminum or copper stop sleeves on 1/4″, 9/32″, 5/16″, and 3/8” diameter cable and wire rope. 

Kit Contains 

• 1 #3-H Hydraulic Handswager Tool 

• 6 Sets of Dies 

• 6 Sets of Gauges 

• 1 Carrying Case 

Maintenance 

Your LOCOLOC® Swager has been designed to give you years of trouble-free service. To obtain the best performance, we recommend: 

1. Keep the tool clean and free from dirt or metal particles, especially around the head, dies, and ram of the tool. 
2. Lubricate all moving parts regularly. 
3. Keep all bolts tight. 
4. Check the oil level periodically and use clean oil as recommended. Never mix different brands or types of oil.