Compression sleeves are one of the most traditional ways to terminate a cable assembly. All of our sleeves are designed around the MS51844 specification. When properly installed, either by machine press or with a hand tool, the resulting loop will achieve the full breaking strength of the cable. We also sell compression sleeves that can be certified to the MS51844 specification.
| For Cable Dia. | A | B | C | Material |
|---|---|---|---|---|
| 1/32″ | 0.25 | 0.135 | 0.088 | Copper/Zinc-Plated |
| 3/64″ | 0.39 | 0.201 | 0.134 | Copper/Zinc-Plated |
| 0.375 | 0.196 | 0.133 | Aluminum | |
| 0.375 | 0.2 | 0.13 | Stainless | |
| 1/16″ | 0.255 | 0.251 | 0.17 | Copper/Zinc-Plated |
| 0.375 | 0.25 | 0.172 | Aluminum | |
| 0.375 | 0.215 | 0.13 | Stainless | |
| 3/32″ | 0.45 | 0.369 | 0.224 | Copper/Zinc-Plated |
| 0.5 | 0.406 | 0.281 | Aluminum | |
| 0.44 | 0.304 | 0.19 | Stainless | |
| 1/8″ | 0.57 | 0.497 | 0.329 | Copper/Zinc-Plated |
| 0.625 | 0.5 | 0.343 | Aluminum | |
| 0.43 | 0.375 | 0.22 | Stainless | |
| 5/32″ | 0.625 | 0.592 | 0.365 | Copper/Zinc-Plated |
| 3/16″ | 0.969 | 0.673 | 0.449 | Copper/Zinc-Plated |
| 1 | 0.656 | 0.406 | Aluminum | |
| 1 | 0.567 | 0.36 | Stainless | |
| 1/4″ | 1.1 | 0.81 | 0.515 | Copper/Zinc-Plated |
| 1.125 | 0.812 | 0.531 | Aluminum | |
| 1.125 | 0.715 | 0.43 | Stainless | |
| 5/16″ | 1.09 | 1.011 | 0.665 | Copper/Zinc-Plated |
| 1.25 | 1.031 | 0.688 | Aluminum | |
| 1.375 | 1.125 | 0.75 | Stainless | |
| 3/8″ | 1.312 | 1.113 | 0.726 | Copper/Zinc-Plated |
| 1/2″ | 1.187 | 1.47 | 0.96 | Copper/Zinc-Plated |
